News

1. Semi-finished products produce wrinkles when windingThe pressure of the tension cylinder can be a...

Slitting machine, we will carry out through some specific problems, because this is also part of its...

1. Technical specifications;Use a power source-pressurized air-Slitting material-Slitting raw materi...

For the paper processing industry, the tape slitter is a very important equipment, almost every day ...

First, the use environment requirements of the slitting machine:The machine should be installed in a...

Regrinding slitter blades1. In the process of using the slitter blade, due to the long-term anti-ext...

Tape slitting machine is a tape processing tool used to cut the tape according to a certain size, us...

In the process of using the slitting machine, the essence of constant tension control in the winding...

The operation control system of the slitting machine is to use a large motor to drive the shaft of t...

First, first of all, we must look at the degree of automation of the rewinder, the higher the degree...

1. During the operation of the slitting equipment, if the tool has the problem of lateral swaying, i...

1. First fold out the upper knife, adjust to the required size and put it back into the lower knife,...