What are the precautions in the production process of hot stamping paper slitting machine?

The hot stamping paper slitting machine needs to pay attention to the following matters in the production process:

First, preparation before operation

1. Equipment Inspection:

• Check whether the appearance of the hot stamping paper slitting machine is in good condition, whether the parts are firm, and whether the power cord is in good condition.

• Check whether the function keys and buttons are normal to ensure that the device is in normal working condition.

• Check that the work surface is flat, clean, and free of foreign objects.

2. Safety protection:

• Operators must wear protective equipment such as gloves, masks, glasses, etc., to prevent burns and inhalation of debris.

• Ensure that the work site is clean and free of debris to avoid tripping or injury to operators.

3. Material preparation:

• According to the size of the hot stamping paper required, prepare the hot stamping paper to be cut in advance.

• Ensure that the hot stamping paper is of good quality, without wrinkles, breakage and other problems.

Second, the operation process

1. Boot preheating:

• Turn on the power of the hot stamping paper slitting machine and preheat the equipment, the preheating time is about 5~10 minutes.

2. Adjust the parameters:

• Adjust the cutting machine's table and knives according to the desired cutting size.

• Ensure that the contact surface between the knife and the hot stamping paper is appropriate to avoid uneven cutting or damage to the hot stamping paper.

3. Place the material:

• Gently place the hot stamping paper into the feeding tray and make sure the hot stamping paper is unfolded in a clockwise direction.

• Check that the underside of the gold foil paper is facing down as it passes under the print head.

4. Start Cutting:

• Press the cutter start button to start cutting.

• During the cutting process, the operator should stay focused and observe the cutting effect.

• If you find that the hot stamping paper is wrinkled, broken and other problems, you should stop cutting immediately and check the quality of the hot stamping paper.

5. Safe Operation:

• During operation, it is strictly forbidden to touch the high-temperature parts of the cutting machine and the knife to prevent burns.

• It is strictly forbidden to put your hands or other parts of your body into the cutting area to avoid accidents.

• When the cutting machine is running, it is strictly forbidden to carry out maintenance, cleaning and other operations.

Third, post-operation processing

1. Power off:

• When the cutting is finished, turn off the power of the cutter.

2. Remove the material:

• Remove the cut bronzing paper and place it properly.

3. Clean up your device:

• Clean the workbench, collect scrap, and keep the equipment clean.

• Check the sharpness of the knife and replace it in time if it is worn.

Fourth, maintenance

1. Regular Inspections:

• Regularly inspect all parts of the equipment, such as blades, gears, transmission belts, etc., to ensure that they are in good condition.

• Check the power cord, plug, etc. to ensure that there is no damage or aging.

2. Clean lubrication:

• Clean the equipment regularly and keep it tidy.

• Lubricate the equipment regularly to ensure smooth operation of the equipment.

3. Professional Training:

• The operator should be professionally trained and familiar with the operating procedures and safety precautions of the hot stamping paper slitting machine.

4. Non-operator management:

• Non-operators are not allowed to operate the hot stamping paper slitting machine to avoid accidents.

To sum up, the hot stamping paper slitting machine needs to pay attention to equipment inspection, safety protection, material preparation, operation process, post-operation processing and maintenance in the production process. The strict observance and implementation of these precautions are of great significance to ensure production safety, improve product quality and extend the service life of equipment.