What are the factors that affect the paper width of the paper slitter

When the paper slitting machine is slitting the paper, the length and width of the paper should be set, but because the paper slitting machine has been working for a long time, the cutting accuracy will decrease, so let's talk about what are the factors that determine the width of the paper by the paper slitting machine?

There are two factors that mainly determine the paper width of the paper slitter, one is the paper cutter and the other is the paper guide roller. As the name suggests, the cutter determines the width of the paper that can be cut, but this does not mean that the wide cutter has to cut the width of the paper. In fact, a slightly narrower knife can also cut wider paper, but this will leave a little paper head during the cutting process, which will affect the overall appearance. Therefore, if you need to cut wider paper or communicate with the supplier, it is advisable to replace the larger blade.

If there is no problem in either of the above cases, it may be that the paper slitter has been running for a while and the paper tray protruding from the right part has an effect on the width of the paper cut.

1. When you start the operation, the strip at the edge is not tightened, which can be avoided when the machine starts cutting the strip.

2. The inner diameter of the core added to the core is too large for the core to be locked after the air shaft expands, causing the core to slide during rotation to cause offset. To resolve this issue, check the inner diameter dimensions of the core while the core sleeve is located in the inlet shaft.